Solid mounted cultivator 3-row General – Bellota KSN 4.0

Cultivator of continuous processing mounted 3-row GENERAL KSN BELLOTA 4.0

Mounted cultivator GENERAL KSN is universal and is used for pre-sowing cultivation and continuous processing of fallows. This cultivator in just one pass across the field provides a complete preparation of the soil for sowing!

GENERAL KSN combines the simultaneous execution of 7 operations:

• cleaning steam from weeds with cutting and combing their roots
• loosening the soil without reversing the layer and incorporating plant residues
• crushing clods of earth and leveling the soil with a rake with spring teeth
• compaction and formation of the ideal structure of the surface layer of the soil by packers to prevent moisture evaporation.

This cultivator is equipped with passive vibrating Bellota S-tines made of highly elastic boron steel. This type of racks is recommended to be used on dry crumbly soil. Thanks to different types of soil and critical loads do not break!

The working bodies on this model are evenly staggered in three rows. This arrangement of racks provides an impeccable effect of loosening and mixing the soil, while not clogging with weeds and plant debris!

Range of application of GENERAL KSN:

• Pre-sowing cultivation and seed bed preparation
• Continuous processing and cleaning of vapors from weeds
• Plowing leveling

Specifications

• Aggregation method: Hinged
• Capture width: 4 m
• Number of rows: 3
• Processing depth: 4-12 cm

Working bodies:

– Type of rack: Passive vibrating S-shaped Bellota made of high tensile steel
– Quantity : 17 pcs.
– Spacing: uniform staggered 220 mm
– Share width: 260 mm
– Shank and shank material: Forged, hardened boron steel with polymer

• ultra-resistant coating
• Frame with 5 mm wall thickness

Equipment:

– Tine rakes with hard spring teeth 8×320 mm made of hardened steel grade 70
– Press rollers with a diameter of 300 mm, a knife thickness of 6 mm and bearings in a UCF 208 cast iron housing (Japan)

• Lubricated actuator pins
• Pins made of steel 45 with cotter pin

All elements of the cultivator undergo mandatory processing, namely: cleaning, grinding and sandblasting! Before painting, primer and dry with a heat gun! At the end, all parts are covered with a polyurethane coating and dried in a drying chamber!

Functional properties

• Adjustment of the angle of attack and the depth of processing of the tines.
• Height adjustment of the press rollers.
• Adjustment of the depth of processing of the cultivator due to the height of the rollers and the hitch of the tractor.